​​​Toolhead Zero-Play, Free-Float for Dillon RL550C


44.90 44.9 USD 44.90

44.90 €

Not Available For Sale

This combination does not exist.

Free-Float System

Floating action allows the dies to center themselves exactly over each cartridge
for the best possible alignment and more concentric ammunition. Free-float rings are sold seperately.

Buy Free-Float Lock Ring


Zero-Play System

The Zero Play toolhead does not use the original toolhead pins supplied by Dillon. It is bolted with two M3 bolts that lift the toolhead into the uppermost position. When you cycle cases downward, the toolhead does not move, and cases go out in a straight line. Best practice is to loosen M3 bolts slightly before inserting the index shell-plate with case into dies and tightening M3 bolts to the toolhead's best position.

How it Works?


Free-Float Lock Rings are sold seperately. Usually you need two free-float rings. One for resizing die and other for bullet seating die. However you can add free-float ring to each station.


Dillon RL550

Armanov RL550 toolhead replaces original Dillon parts

 13909 / 62134 / 62132 / 62133

What Comes in the Box?

1 x Aircraft-Grade Anodized Aluminium Toolhead

1 x 2.5 mm Hex Key

2 x Bolts M3 x 20 & Washers

1 x Caliber Sticker

​Due to use of high tensile strength aluminum which is harder to anodize,  

slight color inconsistencies may occur.

Related Products

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.