Toolhead Zero-Play, Free-Float for Dillon RL550C
Free-Float System
Floating action allows the dies to center themselves exactly over each cartridge
for the best possible alignment and more concentric ammunition. Free-float rings are sold seperately.
Zero-Play System
The Zero Play toolhead does not use the original toolhead pins supplied by Dillon. It is bolted with two M3 bolts that lift the toolhead into the uppermost position. When you cycle cases downward, the toolhead does not move, and cases go out in a straight line. Best practice is to loosen M3 bolts slightly before inserting the index shell-plate with case into dies and tightening M3 bolts to the toolhead's best position.
How it Works?
Free-Float Lock Rings are sold seperately. Usually you need two free-float rings. One for resizing die and other for bullet seating die. However you can add free-float ring to each station.
Compatibility
Dillon RL550
Armanov RL550 toolhead replaces original Dillon parts
13909 / 62134 / 62132 / 62133
What Comes in the Box?
1 x Aircraft-Grade Anodized Aluminium Toolhead
1 x 2.5 mm Hex Key
2 x Bolts M3 x 20 & Washers
1 x Caliber Sticker
Due to use of high tensile strength aluminum which is harder to anodize,
slight color inconsistencies may occur.
Related Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.