New
Shellplate with Case Retainer Spring for Dillon XL650/XL750
Anti-Wobble Case Retainer
Shellplate features a milled groove for a case retainer spring that mounts on the Dillon's frame and securely holds cases in place while cycling the press. Due to the universal spring, you don't need to use locator buttons anymore.
Improved Toughness
Armanov Shellplates are made out of hardened and tempered Toolox® steel, which is known for its strength and wear resistance.
Powder Extraction System
Milled channels in the bottom of the shellplate will catch and extract any spilled powder or debris for the smoothest operation.
Easy Inspection
Spring enables a quick OAL or powder check by simply pulling out and reinserting the case in the desired station.
Installation
The tension in the spring may cause the press not to index properly. If this occurs, adjust the position of the index cam block to allow for additional rotation of the shellplate.
Compatibility
Dillon XL650
Dillon XL750
Numeric Model Codes
- #1 - 13204
.45 ACP, .308 Win, 30-06,... - #2 - 13430
.357 Mag, .38 Special,... - #3 - 13345
.223 Rem, .300 Blackout,... - #4 - 13185
44 Special, 44 Magnum,... - #5 - 13509
9x19, 9x21, .38 Super,... - #6 - 13121
- #7 - 13300
- #8 - 12779
Other Model Codes
- A - 12529
- B - 12903
- C - 12986
- D - 12879
- E - 10300
- G - 10298
- H - 10297
- L - 10295
- N - 10296
- O - 10294
- W - 13310
.40 S&W, 10mm,...
Please refer to the Dillon Caliber Conversion Chart to select the appropriate Shellplate.
What Comes in the Box?
1x Shellplate for Dillon XL650/XL750
1x Pack of Case Retainer Springs for Dillon XL650 & XL750
Due to the steel bluing process, slight color inconsistencies may occur, which won't affect the functionality of the part.
We recommend using an Index Cam Block equipped with a Primer Depth Stop system for consistency in primer seating depth during the reloading process.
Related Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.